Mitsubishi PLA-RP Manuale di Servizio Scaricare il pdf (Pagina 75)

OPERATING PROCEDURE

PHOTOS & ILLUSTRATIONS

6. Removing the pipe temperature thermistor

and condenser evaporator temperature thermistor

(1) Remove the fan guard.(See photo 1)

(2) Remove the bell mouth.(See photo 2)

(3) Remove the electrical box.(See photo 3)

(4) Remove the turbo fan.

(5) Remove the screw of the service panel.

(6) Remove the service panel.

(7) Remove the pipe temperature thermistor which are

inserted into the holder installed to the thin copper pipe.

(8) Disconnect the 2-pin white connector.

7. Removing the panel

(1) Remove the air intake grille.(See figure 1)

Corner panel (See figure 2)

(1) Remove the corner screw.

(2) Slide the corner panel to the direction of the arrow 3, and

remove the corner panel.

Panel (See photo 6)

(1) Disconnect the connector that connects with the unit.

(2) Remove the 2 screws from the panel and loosen another 2

screws, which fix to the oval holes, have different diameters.

(3) Rotate the panel a little to remove the panel.

Photo 7

Photo 6

Photo 5

5. Removing the fan motor

(1) Remove the fan guard.(See photo 1)

(2) Remove the bell mouth.(See photo 2)

(3) Remove the electrical box.(See photo 3)

(4) Remove the turbo fan nut.

(5) Pull out the turbo fan.

(6) Disconnect the connector of the fan motor lead wire.

(7) Remove the 4 nuts of the fan motor.

Photo 4

Fan motor

Nut

Connector

Pipe temperature thermistor

Service access

8. Removing the drain pan

(1) Remove the panel. (See photo 6)

(2) Remove the drain plug (Larger one), drain the remaining

water in the drain pan.

(3) Remove the corner cover. (2 screws)

(4) Remove the bell mouth. (See photo 2)

(5) Remove the electrical box. (See photo 3)

(6) Remove the lead wire holder. (1 screw)

(7) Remove the 4 screws and pull out the drain pan.

w Pull out the left and right of the pan gradually.

Be careful not to crack or damage the pan.

Figure 2

Corner

panel

Screw

Corner

panel

Panel

Screws

Connector

Screws

Screw

Drain pan

Drain plug(Larger)

Corner cover

Lead

wire

holder

Nut

OC297-E-3.qxp 05.5.6 5:36 PM Page 75

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

Commenti su questo manuale

Nessun commento

Mitsubishi PLA-RP Manuale di Servizio Pagina 75

Commenti su questo manuale

Prodotti e manuali riguardandi Climatizzatori a split Mitsubishi PLA-RP